description the XC6206 series are precise, low power consumption, high volt age; positive voltage regulators manufactured using cmos and laser trimming technologies. the series provides large currents with a significantly small dropout voltage. t he XC6206 consists of a current limit er circuit, a driver transistor, a precision reference voltage and an erro r correction circuit. the series is compatible with low esr ceramic capacitors. the current limiter's foldback circ uit also operates as a s hort protect for the output current limiter and the output pin. ou tput voltage can be set internally by laser trimming technologies. it is selectable in 100mv increments within a range of 1.2v to 5.0v. sot-89-3, sot-23-3 ,sot353 and sot23-3b packages are available. features z output voltage range 1.2v to 5.0v (selectable in 100mv steps) z highly accurate 2% z dropout voltage 160mv @ 50ma (3.0v type) z low power consumption 2 a (typ.) z maximum output current 100ma (vin vout+1v) z internal protector current limiter and short protector z small packages sot-89-3, sot-23- 3, sot23-3b,sot353 and other required applications z battery powered equipment z reference voltage sources z cameras, video cameras z mobile phones z communication tools package z sot-89-3 z sot-23-3, sot23-3b z sot353 z other required block diagram figure 1 100ma low dropout cmos voltage regulators xc 62 06 series figure 1 1 date:2011/05 www.htsemi.com semiconductor jinyu
absolute maxi mum ratings parameter symbol maximum rating unit input voltage v in v ss -0.3 v ss +6 output current v out v ss -0.3 v in +0.3 v sot-23-3, sot23-3b 250 sot353 250 power dissipation p d sot-89-3 500 mw operating ambient temperature topr -40 +85 storage temperature ts t g -40 +125 c caution : the absolute maximum ratings are rated values ex ceeding which the product could suffer physical damage. these values must therefore not be exceeded under any conditions. electrical charac teristics item symbol condition min typ max unit circuit output voltage v out(e)1 v in =v out(s) +1.0 v, i out =1 ma v out(s) 0.98 v out(s) v out(s) 1.02 v 1 output current i out v in v out(s) ma 1 1.5 v v out(s) 2.5 v 0.20 0.28 2.6 v v out(s) 3.3 v 0.16 0.24 dropout voltage v drop i out =50 ma 3.4 v v out(s) 5.0 v 0.12 0.20 v line regulations out in out v v v ? ? ? 1 v out(s) +0.5 v v in 5.5 v i out =1 ma 0.05 0.3 %/v input voltage 2 out v ? v in =v out(s) +1.0 v 1.0 ma i out 50 ma 20 40 mv output voltage temperature characteristics out out v ta v ? ? ? v in =v out(s) +1.0 v, i out =10 ma -40c ta 85c 100 ppm/ 1 supply current i ss1 v in =v out(s) +1.0 v 2 a 2 input voltage v in 1.8 6 v ripple-rejection |rr| v in =v out(s) +1.0 v f=1.0 khz vrip=0.5 vrms, i out =10 ma 40 db 1 short current i short v in =v out(s) +1.5 v, 30 ma 1 current limiter i lim v in =v out(s) +1.5 v, 380 ma 1 +1.0 v 100 figure 1 2 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
test circuits typical applicati on circuit 1 basic circuit 2 high output current positive voltage regulator 3 circuit for increasing output voltage 4 circuit for increasing output voltage 5 constant current regulator 6 dual supply caution the above connection diagram and constant will no t guarantee successful operation. perform thorough evaluation using the actual app lication to set the constant. XC6206 XC6206 XC6206 XC6206 XC6206 XC6206 XC6206 figure 1 3 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
application conditions input capacitor (cin): 1.0f or more output capacitor (cl):0.1 f or more (tantalum capacitor) caution a general series regulator ma y oscillate, depending on the externa l components selected. check that no oscillation occurs with the app lication using the above capacitor. typical performan ce characteristics 3.0v output 1. output voltage vs. output current 2. output voltage vs. input voltage 3. dropout voltage vs. output current 4 dropout voltage vs. output voltage 5. output voltage vs. ambient temperature 6. ripple rejection rate figure 1 4 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
7. transient response input transient response load transient response ordering information ???? designator symbol description integer output voltage: e.g. =3, =0 3.0v 2 accuracy: within 2% m sot-23 p sot-89 k sot353 v sot23-3b r embossed tape: standard feed l embossed tape: reverse feed marking rule sot-23sot23-3b & sot-89 XC6206p figure 1 5 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
represents product series symbol product series 6 XC6206pxxxxx represents the assembly lot no. 09az repeated (g,i,j,o,q,w excepted) pin configuration remark please contact the natlinear market ing department for other packages. represents the type of regulator voltage(v) 0.13.0 3.16.0 6.19.0 symbol 5 6 7 represents the output voltage symbol output voltage v symbol output voltage v 0 - 3.1 - f 1.6 4.6 - 1 - 3.2 - h 1.7 4.7 - 2 - 3.3 - k 1.8 4.8 - 3 - 3.4 - l 1.9 4.9 - 4 - 3.5 - m 2 5.0 - 5 - 3.6 - n 2.1 5.1 - 6 - 3.7 - p 2.2 5.2 - 7 - 3.8 - r 2.3 5.3 - 8 - 3.9 - s 2.4 5.4 - 9 - 4 - t 2.5 5.5 - a - 4.1 - u 2.6 5.6 - b 1.2 4.2 - v 2.7 5.7 - c 1.3 4.3 - x 2.8 5.8 - d 1.4 4.4 - y 2.9 5.9 - e 1.5 4.5 - z 3 6.0 - figure 1 6 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
packaging information sot-89-3 sot23-3/sot23-3b sot353 figure 1 7 date:2011/05 www.htsemi.com semiconductor jinyu 100ma low dropout cmos voltage regulators xc 62 06 series
|
